Skip to content
Back to search results

Adsorption Isotherm (Langmuir-Freundlich)

Introduced by
Irving Langmuir
Year
1918
Type
Empirical and theoretical adsorption equilibrium model
Family
Surface Chemistry
Font size

What does it do?

Adsorption isotherms describe the equilibrium uptake of a substance on a solid surface as a function of gas or solution phase concentration at constant temperature.

The Langmuir isotherm (1918) and Freundlich isotherm (1906) are classical empirical models. The Langmuir model assumes monolayer coverage and is mechanistic; the Freundlich model is empirical and describes multilayer or heterogeneous adsorption. These isotherms are essential for designing separation processes (activated carbon filters, molecular sieves) and understanding pollutant sorption.

The intuition behind the method

Adsorption is like seating people at a dinner table: initially, many seats are empty, so new guests quickly find a place (high uptake). As the table fills, fewer seats remain, so uptake slows (saturation). The Langmuir model captures this: uptake increases with concentration but plateaus at saturation (monolayer). The Freundlich model is less rigid: uptake continues increasing (mathematically forever) but at decreasing rate, better describing real heterogeneous surfaces. Both models rely on a simple premise: at equilibrium, adsorption and desorption rates balance.

History

Irving Langmuir developed his isotherm based on kinetic arguments (adsorption-desorption balance) in 1918, revolutionizing surface chemistry. Heinrich Freundlich's empirical equation (1906) predated the mechanistic model but fit many experimental data. Throughout the 20th century, variants (BET for multilayer, Temkin, Dubinin-Radushkevich) extended isotherms to complex systems.

When to use it

Use adsorption isotherms to design fixed-bed adsorbers for gas or liquid separation. They are essential for predicting breakthrough curves and sizing carbon filters, zeolite beds, and ion exchangers. Apply when the system is at or near equilibrium. Avoid when kinetics (adsorption rate) is rate-limiting or when temperature changes significantly during the process.

Limitations and considerations

  • Assumes equilibrium; does not account for mass transfer kinetics or breakthrough transients
  • Langmuir assumes monolayer coverage, which is violated at high loadings (especially in liquids)
  • Freundlich is purely empirical; parameters lack physical meaning
  • Does not capture site heterogeneity well; multilayer or competitive adsorption requires more sophisticated models

Source conditions do not replace independent scientific review or validation by an analysis engine.

Strengths

  • Simple models (Langmuir, Freundlich) are easy to fit and interpret
  • Mechanistic basis (Langmuir) provides physical insight
  • Widely applicable across gas and liquid phase systems
  • Enables quick estimation of column performance without detailed kinetics

Applications

  • Design of granular activated carbon filters for water purification
  • Sizing molecular sieve drying beds in industrial air dryers
  • Predicting pollutant sorption in soil and groundwater transport
  • Modeling oxygen uptake in pressure swing adsorption (PSA) systems

How it works

How it works

1

Measure equilibrium uptake (q_e, mass adsorbed per unit mass adsorbent) at various equilibrium concentrations (C_e) and constant temperature.

2

Plot or tabulate q_e vs. C_e; identify the type of curve (gradual saturation → Langmuir; continued increase → Freundlich).

Formula
C_e, q_e, \text{ reference state}, \text{ temperature}
3

For Langmuir: linearize by plotting C_e / q_e vs. C_e; extract q_m (saturation capacity) and K (affinity constant).

Formula
q_e = \frac{q_m K C_e}{1 + K C_e} \quad (\text{Langmuir})
4

For Freundlich: linearize by plotting log(q_e) vs. log(C_e); extract K and 1/n parameters. Use hybrid models (Sips, Temkin) for better fit.

Formula
q_e = K C_e^{1/n} \quad (\text{Freundlich}), \quad q_e = \frac{q_m K C_e^{n_F}}{1 + K C_e^{n_F}} \quad (\text{Sips})
5

Use the fitted isotherm to predict equilibrium uptake at other concentrations, design adsorption columns, and estimate separation efficiency.

Common pitfalls

  • Applying isotherms far outside the experimental range; extrapolation can be highly inaccurate
  • Confusing equilibrium capacity with dynamic breakthrough time; isotherms alone don't predict column height
  • Neglecting temperature dependence; isotherms shift with temperature, affecting design

Frequently asked questions

What is the difference between Langmuir and Freundlich isotherms?

Langmuir assumes a fixed number of adsorption sites (monolayer saturation); uptake plateaus. Freundlich is empirical; uptake increases indefinitely (at decreasing rate). Langmuir works well for homogeneous surfaces and single-layer coverage; Freundlich fits heterogeneous surfaces and multilayer systems.

How do you choose between isotherm models?

Fit several models (Langmuir, Freundlich, Sips) to your data and compare R² values. Sips (combines both) often fits best. Consider the surface chemistry: homogeneous → Langmuir; heterogeneous → Freundlich or Sips.

What is the relationship between isotherm and breakthrough curve?

The isotherm defines equilibrium, but the breakthrough curve shows the dynamic column performance. Isotherms alone do not predict when breakthrough occurs; you need kinetics and column mass transfer data.

Related methods

Sources

  1. Langmuir, I. (1918). The adsorption of gases on plane surfaces of glass, mica, and platinum. Journal of the American Chemical Society, 40(9), 1361-1403.

    Open DOI reference
    Copied.
  2. Freundlich, H. M. F. (1906). Über die Adsorption in Lösungen. Zeitschrift für Physikalische Chemie, 57(1), 385-470.

    Open publication reference
    Copied.
  3. Yang, R. T. (1997). Gas Separation by Adsorption Processes. Butterworth-Heinemann.

    ISBN: 978-0-7506-3897-0
    Copied.