Skip to content
Back to search results

Reactive Distillation

Introduced by
Klaus Sundmacher
Year
1995
Type
Integrated reaction-separation process model
Family
Process Intensification
Font size

What does it do?

Reactive distillation couples reaction and separation in a single column, where reactants are separated from products continuously while simultaneously undergoing reaction on catalytic trays.

Pioneered in the 1990s by Klaus Sundmacher and others, this process intensification technique dramatically reduces capital cost, energy consumption, and environmental impact for suitable reactions. It is now industrially proven for esterification, hydration, and transesterification processes.

The intuition behind the method

In conventional practice, you react A + B in a separate reactor to produce C, then distill to separate C (product) from unreacted A and B. This requires two vessels. Reactive distillation combines both: the distillation column itself is the reactor. Reactants enter low on the column, react on catalytic trays in the middle, and products are separated overhead or bottoms. The removal of products (especially if equilibrium-limited) drives the reaction forward, improving conversion and selectivity without a separate reactor. Combining operations is more efficient and economical.

History

Reactive distillation emerged as a research topic in the 1980s and was commercialized in the 1990s. Industrial examples include Celanese's acetic acid process (methanol carbonylation) and numerous esterification units. Research continues on reactive separations beyond distillation (chromatographic reactors, membrane reactors).

When to use it

Use reactive distillation for reversible or equilibrium-limited reactions (esters, ethers, alcohols) where product removal improves conversion. It is ideal when reaction is moderately fast (residence time in minutes) and when heating/cooling energy would otherwise be wasted. Avoid for highly exothermic reactions needing precise temperature control or very fast reactions requiring large catalyst inventories.

Limitations and considerations

  • Complex to design; rigorous simulation needed, not simple shortcut methods
  • Difficult to control; distillation stability and reaction coupling can cause oscillations
  • Limited to compatible reactions and separations (thermal windows must overlap)
  • High catalyst inventories; slow reactions require excessive catalyst in column

Source conditions do not replace independent scientific review or validation by an analysis engine.

Strengths

  • Higher conversion and selectivity than separate reactor (product removal drives equilibrium)
  • Reduced capital cost (single vessel vs. reactor + column)
  • Lower energy consumption (combines heating for reaction and distillation)
  • Smaller environmental footprint; intensified process

Applications

  • Esterification: acetic acid + ethanol to ethyl acetate + water (Eastman, Celanese processes)
  • Hydration: isobutane + water to tert-butanol in reactive distillation
  • Transesterification: biodiesel synthesis from oils and methanol
  • Etherification: light olefins + alcohols to ethers (e.g., MTBE, TAME)

How it works

How it works

1

Specify feed composition, catalyst type and location, reaction kinetics, and thermodynamic equilibria.

2

Design the column: number of stages, feed position, catalyst-bearing trays, reflux ratio.

Formula
\text{Define column stages, reactions, feed composition, reflux ratio}
3

On each stage, apply mass balances coupled with reaction rates and vapor-liquid equilibrium simultaneously.

Formula
\text{Mass balance on stage } j: \text{in} = \text{out} + \text{reaction}
4

Use rigorous RADFRAC (rate-based or stage-based) simulations with built-in reaction kinetics modules.

Formula
\text{RADFRAC simulation with reaction kinetics; simultaneous solution of equilibrium and reaction}
5

Evaluate conversion, purity, energy consumption, and compare economics against conventional separate reactor + distillation.

Common pitfalls

  • Underestimating residence time needed for reaction; fast distillation can limit conversion
  • Choosing equilibrium-limited reactions where product removal is not advantageous
  • Neglecting side reactions; selectivity can be poor if undesired products form

Frequently asked questions

Why does product removal improve conversion in reactive distillation?

For reversible reactions, equilibrium limits conversion. Removing product (especially overhead) shifts equilibrium toward products, increasing conversion. This is Le Chatelier's principle applied physically.

Can every reaction be done in reactive distillation?

No. Reactions must be compatible with distillation: moderate temperature (not degrading at boiling point), adequate catalyst lifetime, and ideally equilibrium-limited. Very fast or very slow reactions, highly exothermic reactions, or those requiring precise temperature zones are less suitable.

How do you control reactive distillation?

Control is challenging because distillation and reaction are coupled. Typically, reflux ratio, feed rate, and reboiler duty are manipulated. Advanced control (e.g., model predictive control) is often needed.

Related methods

Sources

  1. Sundmacher, K., & Kienle, A. (2003). Reactive Distillation: Status and Future Directions. Wiley-VCH.

    ISBN: 978-3-527-30623-9
    Copied.
  2. Siringi, S., & Malone, M. F. (1997). Design of reaction/distillation columns for esterification. Computers & Chemical Engineering, 21(12), 1223-1238.

    Open publication reference
    Copied.
  3. James, M. J., Baur, R., & Krishna, R. (2000). Models for reactive distillation. AIChE Journal, 46(12), 2350-2365.

    Open publication reference
    Copied.