Standardized Precipitation Evapotranspiration Index
- Introduced by
- Vicente-Serrano, Beguería, and López-Moreno
- Year
- 2010
- Type
- Probability-based water deficit indicator
- Family
- Drought and water balance analysis
What does it do?
The Standardized Precipitation Evapotranspiration Index (SPEI) is a climate index that combines precipitation and temperature (via reference evapotranspiration) to characterize water deficits and droughts.
Developed by Vicente-Serrano and colleagues in 2010, SPEI extends the SPI framework to account for the combined effect of precipitation deficiency and increased evaporative demand from warming, providing a more physically-based drought metric than precipitation-only indices.
The intuition behind the method
SPEI computes the cumulative climatic water balance (CWB) as the difference between precipitation and reference evapotranspiration (ET0) over a chosen timescale (1, 3, 6, or 12 months). This water balance captures both water supply (precipitation) and water demand (evaporation and plant transpiration, which increases with temperature). CWB is then standardized using a three-parameter log-logistic distribution, yielding SPEI values with the same interpretation as SPI: negative values indicate drought, positive indicate wet conditions. By including temperature effects, SPEI reflects the real hydrological impact of changing climate.
History
Introduced in 2010 by Vicente-Serrano and colleagues, SPEI responded to a recognition that precipitation-only drought indices failed to capture warming-driven increases in evapotranspiration. The index gained traction in climate change research, with the World Meteorological Organization recommending SPEI alongside SPI for drought monitoring. Recent developments include satellite-based ET0 estimates enabling SPEI computation in data-sparse regions, and coupling SPEI with soil moisture and streamflow models for integrated water resource assessment.
When to use it
Use SPEI for drought assessment when temperature is expected to influence water availability (semi-arid and arid regions where evaporative demand is high), for climate change impact assessments (SPEI better captures warming-driven drying than SPI), and for operational drought monitoring where both precipitation deficit and temperature anomalies matter. For tropical humid regions where evapotranspiration is less sensitive to temperature variation, SPI may be adequate.
Limitations and considerations
- Requires temperature data in addition to precipitation, limiting application in regions with sparse temperature observations
- Reference evapotranspiration (ET0) parameterization introduces uncertainty; different ET0 formulae yield different SPEI values
- Probability distribution fitting can be problematic in arid regions with many months of zero precipitation
- SPEI projections inherit large uncertainty from GCM temperature and precipitation projections, particularly at regional scales
Source conditions do not replace independent scientific review or validation by an analysis engine.
Strengths
- Physically motivated: includes both water supply and demand, reflecting real hydrological stress
- Sensitive to warming: captures drying trends driven by increased evapotranspiration, even if precipitation remains constant
- Flexible timescale: supports 1-, 3-, 6-, and 12-month aggregations for assessing impacts at different time horizons
- Improved drought characterization: compared to precipitation-only metrics, SPEI better correlates with streamflow, groundwater, and soil moisture changes
Applications
- Climate change drought projection: using SPEI computed from GCM projections to assess future drought frequency and intensity under warming scenarios
- Operational drought early warning: real-time SPEI computation from regional weather stations to guide water managers and agricultural advisors
- Agricultural stress assessment: correlating SPEI with crop yield data to develop drought impact models for yield forecasting
- Watershed management: using SPEI to assess water availability and plan water allocation and reservoir operations under variable drought scenarios
How it works
How it works
Monthly precipitation and temperature data are collected over a long period (30+ years). Solar radiation, wind speed, and humidity improve ET0 estimates but are not always available.
Reference evapotranspiration (ET0) is computed using the Hargreaves equation (temperature-only) or Penman-Monteith equation (if full meteorological data available). Quality control is applied to remove data errors.
For each accumulation period (1, 3, 6, 12 months), cumulative climate water balance (P - ET0) is calculated. The cumulative distribution is fitted to a log-logistic probability distribution.
The standardized variable (SPEI) is computed by transforming each CWB value using the fitted cumulative distribution function. Results range from approximately -4 (extreme drought) to +4 (extreme wetness).
SPEI maps and time series are analyzed for drought onset, duration, intensity, and recovery. Spatial patterns reveal regions simultaneously affected by drought. Trends in SPEI indicate systematic shifts in water availability (e.g., drying trends in Mediterranean regions).
Common pitfalls
- Assuming SPEI directly represents soil moisture; SPEI is a water balance anomaly relative to climatology, not absolute soil moisture content
- Comparing SPEI values computed with different ET0 methods or precipitation sources; standardization ensures comparability only within consistent datasets
- Over-extrapolating SPEI trends into the future without considering potential changes in precipitation and temperature distributions
Frequently asked questions
What is reference evapotranspiration (ET0) and how is it calculated?
ET0 is the evapotranspiration rate from a reference crop (grass) under well-watered conditions and optimal growing conditions. It represents the atmospheric demand for water. The Hargreaves method estimates ET0 from temperature alone; the Penman-Monteith method uses temperature, humidity, wind, and radiation for greater accuracy. For a given temperature, ET0 increases with aridity (lower humidity) and wind, and with stronger radiation.
How does SPEI differ from the Palmer Drought Severity Index (PDSI)?
Both combine precipitation and temperature. PDSI uses a soil water balance model with prescribed soil properties; SPEI uses simple accumulation of (P - ET0). SPEI is faster to compute and doesn't require soil data. SPEI time series at different timescales are independent; PDSI values at different timescales are derived from a single underlying process. For operational monitoring, SPEI is more practical.
Can SPEI project future drought under climate change?
Yes. Downscaled GCM precipitation and temperature projections can be input to SPEI calculation, yielding SPEI projections for 2050 or 2100. However, large uncertainty exists due to GCM spread and downscaling method. Ensemble SPEI from multiple GCMs is recommended.
What are typical SPEI thresholds for drought classification?
Similar to SPI: SPEI > 1.5 is extremely wet; 1.0–1.5 very wet; 0.5–1.0 moderately wet; -0.5–0.5 near normal; -0.5 to -1.0 moderately dry; -1.0 to -1.5 severe drought; -1.5 to -2.0 very severe drought; < -2.0 extreme drought.
Related methods
Sources
Vicente-Serrano, S. M., Beguería, S., & López-Moreno, J. I. (2010). A multiscalar drought index sensitive to global warming: the Standardized Precipitation Evapotranspiration Index. Journal of Climate, 23(7), 1696-1718.
Open DOI referenceCopied.