Skip to content
Back to search results

SMED

Introduced by
Shigeo Shingo
Year
1985
Type
Setup time reduction technique
Family
Lean Manufacturing
Font size

What does it do?

Single Minute Exchange of Die (SMED) is a systematic approach developed by Shigeo Shingo in the 1980s to drastically reduce the time required to changeover equipment from producing one product to another.

The methodology, part of the Toyota Production System, aims to reduce setup time to a single-digit minute range (ideally under nine minutes), enabling smaller batch sizes, faster response to customer demand, and improved flexibility in manufacturing. SMED is a cornerstone of lean manufacturing and just-in-time production.

The intuition behind the method

Setup time (changeover) is non-value-adding activity—while machines are being reconfigured, no production occurs and no customer need is being met. SMED attacks this waste by first documenting every step in the changeover process, then categorizing actions as external (can be done while the machine is running) or internal (must be done while the machine is stopped). By moving external activities outside the stop window and streamlining internal activities through parallel execution, tool pre-positioning, and standardization, setup time shrinks dramatically. A machine that once required 45 minutes to switch from one product to another might complete the same changeover in 5 minutes, allowing economical production of smaller batches and faster market response.

History

Shigeo Shingo developed SMED in the 1950s–1980s while working with Toyota and other Japanese manufacturers. His systematic approach to setup reduction was a key enabler of Toyota's lean production system, allowing the company to produce multiple models on the same line with minimal downtime. The methodology was published in English in 1985 and has since become a standard lean tool in automotive, electronics, pharmaceuticals, and food manufacturing globally. Modern variants include digital setup documentation and vision-guided tools.

When to use it

SMED is most beneficial in job-shop and batch manufacturing environments with frequent product changes. Apply it when setup time represents a significant portion of total lead time, when you produce multiple SKUs on the same equipment, or when reducing batch size is strategically important (e.g., to lower inventory or shorten delivery lead times). Less critical in high-volume, single-product lines where changeovers are rare. Best results emerge when combined with other lean tools (kanban, standardized work, visual management).

Limitations and considerations

  • Requires detailed process analysis and can be labor-intensive to implement across many product-equipment combinations
  • Heavily equipment-dependent; some setups (e.g., wet-process or precision-alignment equipment) may have limited improvement potential
  • Benefits erode if standardized procedures are not maintained and operators revert to old habits
  • Quick-coupling devices and other hardware improvements may require capital investment, offsetting some of the time savings

Source conditions do not replace independent scientific review or validation by an analysis engine.

Strengths

  • Delivers rapid, dramatic reductions in changeover time (often 50–80 percent reduction within months)
  • Enables production of smaller batch sizes and greater product variety on existing equipment without capital investment
  • Improves equipment utilization and cash flow by reducing downtime and work-in-process inventory
  • Enhances workforce engagement through operator involvement in problem-solving and process standardization
  • Builds foundation for just-in-time production and demand-responsive manufacturing

Applications

  • An automotive parts supplier reduces die-change time on a stamping press from 120 minutes to 8 minutes through external/internal separation and tool pre-positioning, enabling batch size reduction from 5,000 to 200 units
  • A pharmaceutical tablet manufacturer uses SMED to standardize changeover procedures across production lines, improving on-time delivery while reducing contamination risk during transitions between products
  • A printed circuit board assembly line applies SMED with automated feeder repositioning and color-coded toolkits, cutting changeover time from 35 minutes to 4 minutes and enabling faster new product introduction
  • A food packaging company implements SMED for format changes on flexible packaging lines, reducing downtime by 65 percent and allowing production of smaller retail pack sizes with better profitability

How it works

How it works

1

Observe and video-record the current changeover process, documenting every step, person involved, and time consumed.

2

Classify steps as external (can be performed offline) or internal (require machine stoppage). Move external steps outside the stop window.

3

Transform as many internal steps as possible into external steps through process redesign, tool pre-positioning, or parallel execution.

4

Eliminate waste in remaining internal steps through standardized procedures, quick-couplers, and elimination of adjustments.

5

Track setup time, defect rate after changeover, and consistency to identify further improvement opportunities.

Common pitfalls

  • Over-focusing on internal setup time without first extracting external activities; much of the initial gain comes from external/internal separation
  • Implementing standardized changeover procedures without adequate operator training, leading to inconsistent results and safety risks
  • Assuming SMED applies uniformly to all products and equipment; some changeovers may have structural limits that SMED cannot overcome cost-effectively

Frequently asked questions

What counts as a 'minute' in SMED—is it literal single-digit?

The name SMED literally means setup time under nine minutes (single digit). In practice, the goal is to reduce setup time as much as possible; 'single digit' is aspirational, not always achievable. Some complex changeovers might target 10–15 minutes as the goal. The mindset is continuous reduction, not a fixed target.

Can we apply SMED to our software deployment or IT infrastructure?

Yes, absolutely. SMED principles translate to any changeover scenario: database migrations, environment switches, feature deployments. External/internal separation, parallel execution, and automation mirror the manufacturing approach. Infrastructure-as-code and containerization are modern IT equivalents.

Does SMED work for service businesses?

SMED works wherever you have changeover or context-switching time. Examples include clinic patient transitions, restaurant table resets, or retail store section changes. The methodology is identical; just substitute 'setup' with whatever your changeover activity is.

How do we sustain SMED improvements over time?

Document standardized changeover procedures (written, video, checklists), train all operators, conduct regular audits, and measure actual changeover time monthly. Visual management boards and operator-led improvement cycles help maintain discipline and drive continuous refinement.

Related methods

Sources

  1. Shingo, S. (1985). A revolution in manufacturing: The SMED system. Cambridge, MA: Productivity Press.

    Open publication reference
    Copied.
  2. McIntosh, R. I., Culley, S. J., Mileham, A. T., & Owen, G. W. (2008). Changeover improvement: a structured methodology with supporting tools. International Journal of Production Research, 45(24), 5635-5656.

    Open publication reference
    Copied.