HEC-RAS
- Introduced by
- US Army Corps of Engineers Hydrologic Engineering Center
- Year
- 1995
- Type
- 1D/2D river hydraulics and flood inundation modeling
- Family
- Hydraulic and flood modeling
What does it do?
HEC-RAS (Hydrologic Engineering Center River Analysis System) is a hydraulic modeling software developed by the US Army Corps of Engineers that computes water surface elevation and velocity in open channels and floodplains, and depicts inundation extent and depth.
Since its introduction in 1995, HEC-RAS has become the de facto standard for floodplain delineation, dam break analysis, and flood risk assessment for regulatory and engineering purposes.
The intuition behind the method
HEC-RAS solves the one-dimensional and two-dimensional shallow-water equations to determine water surface profiles along rivers and in floodplains. Given channel geometry (cross-section data), Manning's roughness coefficients (representing friction), upstream and downstream boundary conditions (inflow hydrographs, tailwater stages), and riverine structures (dams, weirs, levees), HEC-RAS computes water depth and velocity at each location. Maps showing inundation extent, flood depth, and velocity hazard are generated by overlaying computed water surface elevations on digital terrain models.
History
First released in 1995 by the Hydrologic Engineering Center (HEC), HEC-RAS combined flood routing and floodplain delineation in a user-friendly package. It supplanted earlier hydraulic models (HEC-2) due to superior graphics and integration with GIS. The 2002 release added unsteady-state capability; 2016 release added 2D shallow-water capability. Recent versions support sediment transport and water quality modules.
When to use it
Use HEC-RAS for riverine flood hazard assessment, floodplain delineation for regulatory compliance (FEMA mapping), design of levees and flood walls, and dam break studies. HEC-RAS is most reliable for dendritic river systems with well-defined channels. For large floodplains with complex flow patterns, sparse surveyed cross-sections, or coastal applications with tidal backwater effects, use 2D HEC-RAS or coupled 2D models (HEC-RAS 2D, TUFLOW, MIKE 21).
Limitations and considerations
- 1D version assumes uniform flow across cross-sections and cannot capture lateral flow divergence or eddy zones in complex geometries
- Sensitive to cross-section spacing and roughness parameterization; sparse cross-sections lead to interpolation errors and incorrect floodplain extent
- Cannot directly model three-dimensional effects (secondary flows, vertical circulation), limiting applicability in bends and confluences
- 2D version is computationally expensive for large domains and long simulation periods
Source conditions do not replace independent scientific review or validation by an analysis engine.
Strengths
- Widely accepted by regulatory agencies (FEMA, USACE) for official floodplain delineation and hazard mapping
- Mature software with extensive documentation and a large user community
- Flexible for both steady-state (design storms) and unsteady-state (dynamic flood routing) analysis
- Capability to model bridges, culverts, dams, and inline/offline storage areas within a unified framework
Applications
- Regulatory floodplain delineation: computing 100-year and 500-year flood extents for official FEMA flood insurance rate maps
- Levee and flood wall design: determining required heights and alignment for effective flood protection
- Dam break analysis: simulating breach failure scenarios and downstream inundation to assess hazard zones
- Culvert and bridge design: modeling hydraulic performance of crossing structures and determining scour potential
How it works
How it works
River and floodplain cross-sections are surveyed or extracted from lidar digital elevation models. Roughness coefficients are estimated from aerial imagery, field observations, or published tables. Upstream inflow hydrographs and downstream boundary conditions are obtained from hydrologic models or historical flood records.
Cross-sectional data are compiled and interpolated. Terrain models and floodplain land-use maps are prepared. Manning's n values are assigned to each section segment.
The hydrologic model (e.g., SWAT, HEC-HMS) provides inflow hydrographs. HEC-RAS steady-state or unsteady-state analysis is chosen based on the flood scenario.
The 1D shallow-water equations (Saint-Venant equations) are solved using finite-difference methods. For 2D analysis, the 2D shallow-water equations are solved on a computational grid. Water surface elevation, velocity, and Froude number are computed at each node.
Computed water surface elevations are overlaid on terrain to generate inundation maps. Flood depth, velocity, and hazard (depth × velocity) are mapped. Results are compared against observed or historical high-water marks for validation.
Common pitfalls
- Over-relying on 1D model for braided or multi-channel river systems; use 2D or hybrid 1D/2D instead
- Underestimating roughness in vegetated floodplains, leading to underestimation of flood extent and depth
- Neglecting levee breaches or overtopping in scenarios where levee stability is uncertain
Frequently asked questions
What is the difference between steady-state and unsteady-state HEC-RAS analysis?
Steady-state assumes the flood peak persists long enough that water surface slopes and velocities reach equilibrium. It requires only one inflow-outflow pair and is fast to compute. Unsteady-state tracks the flood hydrograph dynamic propagation downstream, accounting for channel storage and attenuation. Unsteady-state requires a hydrograph and is more computationally expensive but more realistic for transient floods.
How sensitive are HEC-RAS results to Manning's roughness coefficient?
Very sensitive. A 10% error in Manning's n can produce 5–15% errors in computed water surface elevation and 20–40% errors in computed velocity. Careful field characterization, use of published atlases (Arcement and Schneider, 1989), and sensitivity analysis are essential. Calibration against observed high-water marks improves n estimates.
Can HEC-RAS model storm surge or tidal flooding?
HEC-RAS can model tidal backwater effects if downstream boundary conditions (time-varying tailwater stages from tide gauges) are specified. However, for coastal storm surge with wave action, HEC-RAS is less suitable. Specialized coastal models (ADCIRC, SLOSH, or 2D coastal versions) are preferable.
What cross-section spacing is needed for accurate HEC-RAS results?
Spacing depends on channel complexity and slope. Straight channels with uniform cross-sections may tolerate 500–1000 m spacing; bends, confluences, or areas with significant slope changes require 50–200 m spacing. Too-large spacing misses local features; too-small spacing increases computation time with diminishing accuracy gains. Start with ~200 m and refine in areas of interest.
Related methods
Sources
Brunner, G. W. (2010). HEC-RAS river analysis system hydraulic reference manual. US Army Corps of Engineers Hydrologic Engineering Center.
Open publication referenceCopied.Dyhouse, G. R., Hatchett, J. L., & Barkau, R. L. (2003). Floodplain modeling using HEC-RAS. Haestad Press.
Open publication referenceCopied.