RT60 Reverberation Time
- Introduced by
- Wallace Clement Sabine
- Year
- 1900
- Type
- Room acoustic descriptor
- Family
- Acoustic measurement
What does it do?
RT60 (reverberation time) is the duration required for sound energy in a room to decay by 60 decibels after the source stops.
Pioneered by Wallace Clement Sabine in 1900, RT60 is the most widely used single-number descriptor of room acoustic properties. It reflects how much sound is absorbed versus reflected by room surfaces and directly affects speech intelligibility, music clarity, and acoustic comfort.
The intuition behind the method
Imagine shouting in a cathedral versus a living room. In the cathedral, your shout echoes for seconds; in the living room, it fades quickly. RT60 quantifies this difference—it measures how 'live' or 'dead' a room is. A longer RT60 means more reflections and reverberation; a shorter RT60 means the room absorbs sound quickly. Knowing the RT60 tells you instantly how long speech will ring in a space, how intelligible a lecture will be, and how to adjust acoustic treatment for comfort.
History
Wallace Clement Sabine pioneered room acoustic science in 1900 by empirically measuring reverberation time and deriving the Sabine formula for absorption coefficient prediction. Eyring extended this work in 1930 with a non-linear refinement. Schroeder's 1965 work on integrated impulse response methods improved RT60 measurement accuracy. Modern RT60 measurement follows ISO 3382 standards and is conducted using digital signal processing, inverse Fourier transforms (Schroeder's decay curve), and statistical validation methods.
When to use it
Use RT60 analysis when designing or renovating rooms for speech (classrooms, offices, auditoriums), music (studios, concert halls, recording spaces), or noise control. RT60 is essential for meeting acoustic standards and predicting speech intelligibility. Avoid over-reliance on RT60 alone; use it alongside other metrics (early decay time, clarity index, initial time delay gap) for complete acoustic assessment.
Limitations and considerations
- RT60 is a late-decay metric; it does not capture early reflections or spatial perception, which significantly affect acoustic quality.
- Dependent on measurement position; a single RT60 measurement may not represent the whole room, especially in non-uniform spaces.
- Assumes exponential decay; many real rooms show non-exponential behavior (multiple decay rates, room modes), making simple exponential fits inaccurate.
- Dominated by late reflections and background noise; reliable RT60 measurement requires adequate SNR and clean late-decay regions.
- Sabine and Eyring formulas are approximations that break down for highly absorptive or low-absorption rooms; empirical data is preferred for design.
Source conditions do not replace independent scientific review or validation by an analysis engine.
Strengths
- Simple, standardized, and universally understood metric; a single number captures fundamental room acoustic character.
- Well-established optimal values for different room types (speech, music, noise control) enable rapid assessment and design decisions.
- Low cost to measure with industry-standard sound level meters and impulse generation methods.
- Directly related to room absorption through Sabine and Eyring formulas, enabling prediction of acoustic treatment effectiveness.
- Frequency-dependent (RT60 varies by band), providing insight into spectral acoustic behavior of the room.
Applications
- Concert hall design and renovation: measure existing RT60 to predict acoustic changes from material treatments and validate acoustician models.
- Classroom and office acoustics: achieve optimal RT60 (0.4–0.8 s) for speech intelligibility and reduce noise distraction.
- Recording studio and music production: control RT60 at different frequencies to shape the acoustic signature of vocals, instruments, and mixing environments.
- Hearing aid and cochlear implant design: account for real-world RT60 environments when tuning speech enhancement and feedback cancellation algorithms.
- Underwater and architectural acoustics: extend RT60 principles to characterize absorption and reflection in water bodies, tunnels, and complex geometries.
- Audio forensics and legal acoustics: estimate room properties from speech recordings by inferring RT60 and comparing against reference acoustic databases.
How it works
How it works
Emit a loud, broad-spectrum sound (impulse, noise, or chirp) in the room and record the resulting decay with a calibrated microphone positioned at a listening location.
Remove measurement artifacts, ensure the recorded signal has adequate signal-to-noise ratio, and correct for background noise so the decay can be accurately tracked.
Plot the energy envelope of the recorded signal over time (e.g., using a sound level meter's exponential averaging or reverse time integration). Identify the frequency bands of interest (typically 125 Hz–4 kHz for speech and music).
Fit an exponential decay model to the energy decay curve: fit the time interval from 0 dB (peak) to –60 dB (60 dB below peak), or use the alternative –5 to –35 dB interval (T20) and extrapolate to T60.
Extract RT60 values at octave or one-third octave bands. Compare against acoustic standards (e.g., optimal RT60 for speech, music genres). Use RT60 to estimate room absorption and guide acoustic treatment decisions.
Common pitfalls
- Confusing RT60 with the full reverberation time; RT60 is specific to the 0 to –60 dB window and may not match subjective perceptions of reverberation length.
- Measuring RT60 in noisy conditions; background noise can mask the true decay and inflate RT60 estimates, especially at high frequencies.
- Using a single RT60 value across all frequencies without considering frequency-dependent absorption; rooms often absorb more at low frequencies.
- Assuming RT60 alone predicts acoustic quality; early reflections, spatial variance, and other factors equally influence perception.
- Failing to follow standardized measurement protocols (ISO 3382); inconsistent microphone placement, averaging methods, or decay integration can yield inconsistent results.
Frequently asked questions
What is the difference between RT60, T20, and T30?
RT60 measures decay from 0 to –60 dB; T20 measures from –5 to –25 dB and is extrapolated by 3; T30 measures from –5 to –35 dB and is extrapolated by 2. In practice, T20 and T30 are often more accurate because they avoid very-low-amplitude noise regions. All three should yield similar values in ideal conditions.
What is a good RT60 for a lecture hall?
For speech, optimal RT60 ranges from 0.4 to 0.8 seconds (depending on room size and acoustic standards). A concert hall requires 1.8–2.5 s for music, while a recording studio may need 0.2–0.5 s. Consult acoustic standards (e.g., ISO 11957) for your specific room type and desired use.
Why does RT60 vary across frequencies?
Different materials absorb different frequencies differently. Soft materials (foam, carpet) absorb high frequencies more than low frequencies, so RT60 is typically longer at low frequencies. Frequency-dependent RT60 measurements (octave or one-third octave bands) reveal this behavior.
How do I measure RT60 accurately?
Use a calibrated sound level meter or audio recorder, emit a broad-spectrum impulse (clap, gunshot, or pink noise burst), and record decay in a quiet environment. Measure in multiple locations and frequency bands, average results, and follow ISO 3382 protocols to ensure consistency and accuracy.
Can RT60 alone predict speech intelligibility?
RT60 is one factor; speech intelligibility also depends on room geometry, initial time delay gap, early-to-late ratio, and background noise. Use RT60 alongside other metrics (clarity index C50, definition D50, early decay time EDT) for a complete assessment.
Related methods
Sources
Sabine, W. C. (1900). Collected Papers on Acoustics. Dover Publications.
Open publication referenceCopied.Schroeder, M. R. (1965). New method of measuring reverberation time. Journal of the Acoustical Society of America, 37(6), 409–412.
Open DOI referenceCopied.Eyring, C. F. (1930). Reverberation time in dead rooms. Journal of the Acoustical Society of America, 1(2), 217–241.
Open DOI referenceCopied.